5th Gen 4Runner Cargo Power Panel | Billet Aluminum Rear 12V, USB + Switch Panel | 2010 - 2024 4Runner

Turn your 4Runner's cargo area into a real power station in under 2 minutes.

The TEQ Offroad Cargo Power Panel replaces the factory rear power panel in your 5th Gen 4Runner with a billet aluminum panel that keeps your factory 120V outlet and adds a 12V socket, fast USB charging, lighted switches and a live volt reading right where you load your gear. It plugs into the factory rear outlet connector with an OEM-grade connector and snaps into place by hand in under 2 minutes, so there's no cutting, splicing, prying or tools. Phones, fridges and other accessories all get clean, reliable power from the back of the truck.

The features below describe the Fully Assembled kit. The Billet Housing Only kit gets the same billet aluminum, snap-fit housing for your existing components.

✅ Billet Aluminum Construction - Precision-machined from solid aluminum, not 3D-printed plastic. Anodized black for a clean, durable finish that resists wear and corrosion. Built to handle trail vibration and cargo-area heat.

✅ 45W USB-C PD + QC3.0 USB-A Fast Charging - One USB-C Power Delivery port (45W) and one Quick Charge 3.0 USB-A port fast-charge phones, tablets, many laptops and camera batteries right from the cargo area.

✅ Keeps Your Factory 120V Outlet + Adds a 12V Socket - The factory 120V outlet stays in place, top left, and a capped 12V cigarette-style socket sits beside it for a fridge, a 12V charger or other 12V gear. Some 5th Gens came with only a 12V outlet and no 120V plug. No factory 120V outlet? Choose the cover with switch option, and it fills that spot with one more switch.

✅ 3 Lighted Rocker Switches: 1 Master + 2 Extra with 12V Supplied - The master switch turns the whole panel off, so it draws nothing when you're not using it. The 2 extra switches come pre-wired with 12V and ready for rear lighting, a fridge or other accessories, with no new power wires to run to the battery.

✅ Dedicated Premium Volt Meter - See your battery voltage at a glance before you run a fridge overnight or air up after the trail.

✅ OEM-Grade Plug-and-Play Connector - Plugs straight into the factory rear outlet connector. No loose spade terminals to rattle off on washboard roads.

✅ Installs in Under 2 Minutes - Unplug the factory panel, plug in the TEQ panel, and snap it in by hand. No tools, no prying, no wiring.

✅ Snap Fit, Not Pressure Fit - Mechanical clips lock the panel in. It seats flush every time and won't vibrate loose or back out as the trim wears.

✅ Backed by a Lifetime Warranty - Every TEQ Offroad Cargo Power Panel is backed by a lifetime warranty.

Choose Your Kit

• Fully Assembled - The complete TEQ Offroad Cargo Power Panel, fully outfitted and ready to plug in. Everything listed above comes installed in the billet housing.
• Billet Housing Only - Already running another brand's rear panel? Upgrade to billet aluminum by moving your existing components into our snap-fit housing.

How It Installs (Under 2 Minutes)

1. Pop out the factory panel. Pull the factory rear power panel out of the cargo-area trim by hand.
2. Unplug the factory connector. Disconnect the factory rear outlet connector from the back of the old panel.
3. Move your factory 120V outlet into the TEQ panel. It snaps right in (see the video below). No 120V outlet? Use the included cover with switch if you ordered it.
4. Plug in the TEQ panel. Connect the factory rear outlet connector to the TEQ panel's OEM-grade plug. No splicing or spade terminals.
5. Snap it in. Press the panel into the opening until the clips lock and it sits flush. You're done.

Full step-by-step installation instructions come in the box.

Specs

• Material: Billet aluminum, precision-machined
• Finish: Anodized black
• USB ports: 1 USB-C Power Delivery (45W) + 1 Quick Charge 3.0 USB-A
• 12V socket: 1 capped 12V cigarette-style socket
• 120V: Keeps the factory 120V outlet. No factory 120V outlet? Choose the cover with switch option.
• Note: The 120V outlet is not included. Photos show the panel after transplanting your 4Runner's factory 120V outlet into it.
• Switches: 3 lighted rocker switches: 1 master switch that turns the whole panel off, plus 2 extra switches pre-wired with 12V for accessories
• Volt meter: Dedicated premium battery volt meter
• Connector: OEM-grade plug-and-play, connects to the factory rear outlet connector
• Mounting: Snap fit, tool-free
• Install time: Under 2 minutes
• Fitment: 2010 - 2024 Toyota 4Runner (5th Gen), all trims, factory rear cargo power panel location
• Warranty: Lifetime

What's Included?

Fully Assembled:

• (1) TEQ Offroad Billet Aluminum Cargo Power Panel, fully assembled
• (1) Set of installation instructions

Billet Housing Only:

• (1) TEQ Offroad Billet Aluminum Housing (uses your existing panel components)
• (1) Set of installation instructions

Note: The 120V outlet is not included. Photos show the panel after transplanting your 4Runner's factory 120V outlet into it.

Optional Add-On:

• Cover with Switch - Some 5th Gen 4Runners came with only a 12V outlet and no 120V plug. If yours doesn't have the factory 120V outlet, answer "No" to "Does your 4Runner have the factory 120V outlet?" above. You'll get a cover that fills the 120V spot and adds one more switch for your accessories.

Compatibility

• Fits all 2010 - 2024 Toyota 4Runner (5th Gen) models, all trims
• Mounts in the factory rear cargo power panel location
• No factory 120V outlet? Choose the cover with switch option.