Toyota Dash Mounts for Tacoma, 4Runner, Tundra & Sequoia
Laser-cut aluminum mounts for phones, radios and gauges, shaped to the center console or grab handle of 1993–2015 Toyotas.
- 4.89 · 181 reviews
- 1/8-inch aluminum, black powder coat
- Designed by founder Dmitriy
- 30-day returns
Shop by vehicle
Filters
11 products
Why TEQ dash mounts
A solid base for the gear you reach for on the trail, with no cutting into your dash.
1/8-inch aluminum
Laser cut and finished in black powder coat, so the plate stays rigid on washboard roads.
No cutting
MAMs fasten to the factory bezel with the included screws. HAMs use the factory grab handle mounting points.
Bring your own accessories
Anything that mounts with a 1/4" bolt fits: RAM-style balls, Bulletpoint arms, radios and gauges.
Made in small batches
Designed by TEQ founder Dmitriy and built in small batches.
MAM or HAM?
Run one, the other, or both.
| Feature | Modular Accessory Mount (MAM) | Handle Accessory Mount (HAM) |
|---|---|---|
| Mounts to | Center console bezel, in your line of sight | Factory grab handle; the handle still works |
| Best for | Phones, navigation and several devices on one plate | A radio or single device while the dash stays clear |
| Fits | 1998–2004 and 2005–2015 Tacoma, 1996–2002 and 2003–2009 4Runner, 2000–2006 Tundra, 2001–2007 Sequoia | 1996–2000 Tacoma, 1996–2002 4Runner, 1993–1998 T100 |
| Install | Included self-tapping screws (the 3rd Gen 4Runner also has a through-bolted option) | New bolts included, since factory handle bolts are often seized |
| Radio holder | MAM radio holder | HAM radio holder |
| Material | 1/8-inch aluminum, black powder coat | 1/8-inch aluminum, black powder coat |
Phone cradles, RAM balls and arms are not included. Every mount ships as the plate plus hardware and instructions.
TEQ dash mounts installed in Toyota trucks
A solid base for your phone, radio and gauges
Each mount is a plate plus hardware. You pick the cradle, radio or gauge that goes on it.
- Shaped to the center console bezel (MAM) or factory grab handle (HAM)
- Takes anything that mounts with a 1/4" bolt, including RAM-style balls and Bulletpoint arms
- Installs with the included hardware, with no cutting into the dash
Why aluminum, not steel (same size plate)
| Property | Aluminum | Steel |
|---|---|---|
| Weight | About 1/3 of steel | About 3x heavier |
| If scratched | Does not rust | Rusts where it chips |
Let customers speak for us
You make a really good product, very sturdy and solid mount. Will be needing more products for for this and other vehicles keep it up 🫡
I gave this bracket a shot as ive gone through too many crappily designed phone holders in the past, and this one is by far the best thing I've ever tried I paired it with a Ram Mounts and I've been in heaven.
Bought this for my son's 1st gen. He wanted a way to mount an external speaker for his GMRS radio. Also have the mic holder and portable radio attached also made by TEQ.
Great peace
Great product and perfect fit. The supplied screws made the fitment supper easy. Should have purchased a long time ago.
Mounted right up no problem. Exactly what I was looking for to mount my phone holder. Excellent product.
The mount fit great. Install was very easy. I’ve already recommended it to others.
1st Gen owners know how neglected out poor Tacos are in the aftermarket realm so after my find got a console molle panel bracket for his 2nd gen I've been looking for one ever since. Dmitriy nailed it with this one. It's so much stiffer than I anticipated and open up loads of possibilities for mounting and storage of all kinds of thing. I've already got things ordered to mount my pew pew and have taken everything off my crappy fabric molle panel visors and transferred to this. Great product!
Easy install and solved issues I had for mounting accessory’s. TEQoffroad always showing love for the 1st gen’s. 10/10
This panel is very easy to install, very little mechanical know-how needed. It looks great, performs great, and pairs well with the dash mount, completely solving the lack of real-estate needed to install an aftermarket communication device.
On-line interaction ✔️
Shipping ✔️
Installation easy ✔️
Product 10 out of 10
There isn't a lot of interior accessories for the first gen Tacoma.
When you find something like this you need to buy it.
It fits and works perfectly.
Im currently waiting for the center console molle panel to arrive
It's a solid mount and does the job effectively. For $80 its a steep price for a not so complicated design. However, it does what I need to and it's a small business so I'm happy. I use it off-road and theres minimal play, the mount you buy to go on this is more important for reducing virbation so buy a quality phone/device mount that goes on to this. Its a nice slim design. Just be aware your hvac controls and other buttons get limited visibility with this.
This fits better than good! I can't say it better than that. If your reading this and on the fence, stop reading and commit. This is a solid purchase.
Installed on 2018 Toyota Tacoma TRD Sport Crewcab Shortbed
First off I want to say that I love these molle panels, the concept, and the how they come out. They are solid, sleek and look like they should have been on the 3rd gen tacomas from the factory. I believe that they can hold a considerable amount of weight (i tested a 10lbs weight hanging from the bottom and i know they could support double that). They really take a dead useless space and turn it into something functional and esthetically pleasing to look at.
The only real feedback I have for the producer and seller is with the included hardware (the screw not the spacers). The included screws have no way to anchor the molle from the opposite side of the door. Literally the instructions just say screw em in but not to tight so that the plastic wont hold. I read this and knew that wouldnt do. I first planned to rivet them seeing that it would be an easy and quick substitution, but i didnt have long enough rivets (ordering would take a long time). I had some really nice chrome hex bolts saved from a different project that looked and did the job fantastically. I drilled holes in the panel and tightened the bolts by popping only the bottom of the door out (I did not have to take the panel completely off). The job only took about 45 minutes for both panels and the screws give them a really nice accent.
Honestly I still give these panels a 5/5 and highly recommend them to all 3rd gen owners. I hope they find a better mounting option however. If you plan on getting these, my advice is take your time in the measuring and drilling, and find better mounting screws.
Very straightforward install on my 22 Taco. The challenge was getting the 40" lights on straight. I'm impressed with how bright and illuminating it is. I like it so much I have another one ordered for my wife's Lexus RX 350. Thank you for a great product.
Toyota Dash Mount Questions
Still not sure what fits your truck? Email support@teqoffroad.com.
Contact usWhich TEQ dash mount fits my truck?
Do you make a dash mount for 2016 and newer Tacomas?
What is the difference between a MAM and a HAM?
Which accessories bolt onto a TEQ dash mount?
Do I have to cut my dash?
Dash mount buying guide
TEQ Offroad dash mounts are aluminum plates shaped to the center console of older Toyotas: 1998–2015 Tacomas, 1996–2009 4Runners, 2000–2006 Tundras and 2001–2007 Sequoias. Each Modular Accessory Mount (MAM) gives a phone cradle, handheld radio or gauge a solid base. Handle Accessory Mounts (HAM) use the grab handle instead. Find your truck below.