4th Gen 4Runner Cargo Power Panel | Billet Aluminum Rear Dual 12V, USB + Switch Panel | 2003 - 2009 4Runner

Two 12V sockets, fast USB-C and a volt meter, right where your 4th Gen's single rear outlet used to be.

Your 2003 - 2009 4Runner left the factory with one 12V outlet in the cargo area, designed years before USB-C existed. The TEQ Offroad Cargo Power Panel takes over that spot with a billet aluminum panel carrying two capped 12V sockets, a 45W USB-C PD port, a QC3.0 USB-A port, a volt meter, a master switch and two extra switches for your accessories. It mates with the factory rear outlet plug through a plug-and-play connector and clips in by hand in under 2 minutes. Nothing to cut, splice or unbolt.

Everything listed below describes the Fully Assembled kit. Already own another brand's rear panel and want to keep its components? The Billet Housing Only kit gives you the same machined, snap-fit housing to move them into.

✅ Machined Billet Aluminum, Anodized Black - CNC-machined from solid aluminum instead of 3D-printed or molded plastic, then anodized black. A rigid housing made to put up with trail vibration, gear sliding in and out, and hot days in the back of the truck.

✅ Two Capped 12V Sockets - Keep a 12V fridge plugged into one socket and still have a second open for a phone charger, a camp light or other 12V gear. Each socket has its own cap to keep dirt out when it's not in use.

✅ 45W USB-C PD + QC3.0 USB-A - Bring a 2000s-era truck up to date. The 45W USB-C Power Delivery port quick-charges current phones, tablets and many laptops, and the Quick Charge 3.0 USB-A port takes care of older cables and devices.

✅ 3 Lighted Switches: 1 Master + 2 Extra - A lighted master switch sits on the face of the panel, along with two extra lighted switches ready for the accessories you add to your build later.

✅ Built-In Volt Meter - Watch your battery voltage from the cargo area while the fridge, chargers and other gear are running.

✅ Plug-and-Play Connector - Connects straight to the factory rear outlet plug. No wire taps, no splices, no loose spade terminals, and nothing to change at the fuse box.

✅ Tool-Free Install in Under 2 Minutes - Pull the old panel, swap the plug over, press the TEQ panel in. That's the whole job.

✅ Snap Fit - Clips lock the panel into the factory opening so it sits flush and stays put on washboard roads and rocky trails.

✅ Backed by a Lifetime Warranty - Every TEQ Offroad Cargo Power Panel is backed by a lifetime warranty.

Pick Your Kit

• Fully Assembled - The complete panel with both 12V sockets, the USB-C and USB-A ports, the switches and the volt meter already mounted in the billet housing. Plug it in and go.
• Billet Housing Only - An upgrade kit for owners of another brand's rear panel. Move your existing components out of the old housing and into machined billet aluminum.

Installation: 4 Steps, Under 2 Minutes

1. Release the factory panel. Unclip the factory rear power panel from the cargo-area trim by hand.
2. Disconnect the factory plug. Unplug the factory rear outlet connector behind it and set the old panel aside.
3. Connect the TEQ panel. Plug that same factory connector into the TEQ panel's plug-and-play connector.
4. Press it home. Seat the TEQ panel in the factory opening and push until the clips click into place and it sits flush.

Installation instructions are included with both kits.

Specs

• Material: Billet aluminum, precision-machined
• Finish: Anodized black
• 12V sockets: 2 capped 12V sockets
• USB ports: 1 USB-C Power Delivery (45W) + 1 Quick Charge 3.0 USB-A
• Switches: 3 lighted switches: 1 master + 2 extra ready for your accessories
• Volt meter: Built-in battery volt meter
• Connector: Plug-and-play, connects to the factory rear outlet connector
• Mounting: Snap fit, tool-free
• Install time: Under 2 minutes
• Fitment: 2003 - 2009 Toyota 4Runner (4th Gen), all trims, factory rear power panel location
• Warranty: Lifetime

What's Included?

Fully Assembled:

• (1) TEQ Offroad Billet Aluminum Cargo Power Panel, fully assembled
• (1) Set of installation instructions

Billet Housing Only:

• (1) TEQ Offroad Billet Aluminum Housing (for the components from your existing panel)
• (1) Set of installation instructions

Compatibility

• Fits 2003 - 2009 Toyota 4Runner (4th Gen), all trims
• Mounts in the factory rear power panel location in the cargo area
• Connects to the factory rear outlet connector, no adapters needed